Categories
Ford VCMM Advanced Kit With Panasonic CF53 Laptop Ready to Go
$7 195.00
In stock
Product Details
Give us a call 866-217-0063!
The Vehicle Communication & Measurement Module (VCMM) combines all of the functionality of the VMM, VCM II, and MTS 4000/4100 vibration analyzer in an industry leading one-box solution. The combining of this functionality will provide dealers with industry leading diagnostic capability at a significantly lower cost of ownership.
Panasonic Toughbook CF-53
This semi-rugged laptop computer is the new preferred laptop from Rotunda that meets or exceeds the specifications to run the IDS software with the VCMM, VCM or VCM II. The CF-53 has been thoroughly tested with the IDS software. See item 164-R9816 for current specifications.
This Dealer Kit Includes:
Ford VCMM Advanced Kit
Full Dealers Software License Included
CF-53 Panasonic Toughbook Included
Tech Support Included
Full Warranty 2 Year
|
FORD VCMM DIAGNOSTIC CAPABILITY (DOES IT ALL) |
|
|
Retrieve CMDTC's |
|
|
KOEO (Key-On-Engine-Off) |
|
|
KOER (Key-On-Engine-Running) |
|
|
Data logger |
|
|
Body |
|
|
Chassis |
|
|
Electrical |
|
|
Powertrain |
|
|
Pressure/Vacuum Tests |
|
|
Network Test |
|
|
Module Programming |
|
|
Programmable Module Installation |
|
|
Module Reprogramming |
|
|
Programmable Parameters |
|
|
Body Tools |
|
|
PATS Functions |
|
|
Remote Keyless Entry |
|
|
Factory Keyless Entry Code |
|
|
Restraints |
|
|
Chassis Tools |
|
|
Bleed anti-lock brakes |
|
|
IVD Initialization Sequence |
|
|
Ride Height Calibration |
|
|
Pneumatic Test |
|
|
Accurate Trim Test |
|
|
Electrical Tools |
|
|
Charging System Test |
|
|
Parking Aid Switch Test |
|
|
Audio |
|
|
Powertrain Tools |
|
|
EVAP Test |
|
|
Fuel Economy Test |
|
|
Fuel System Test/RelativeInjector Flow Test |
|
|
Ignition System Test |
|
|
Spark Duration PIDs |
|
|
Power Balance Test |
|
|
Relative Compression Test |
|
|
Transmission Test |
|
|
Engine Checks and OBD Tests |
|
|
EGR Test |
|
|
Other Powertrain tests & functions |
Key Features:
- Vehicle Communication (VCM II capability) FULL DIAGNOSTIC AND PROGRAMMING
- Customer Flight Recorder capable
- 4-Channel Oscilloscope
- 4-Channel Digital Multi-meter
- 5th-Channel direct monitoring of the DLC connector
- Vibration Analysis
- Driveline Balance
- Signal Generator
4/5 Channel Oscilloscope
- Improved user interface from VMM
- Four independent differential Input Channels enables independent monitoring of signal types such as monitoring voltage while concurrently measuring voltage drop across the circuit.
- A Fifth High Speed Channel that can directly monitor CAN signals at the DLC connector
- Capture/Record capability to assist in capturing intermittent issues
- Advanced Triggering capability
- Pre-Configured setup configuration for common signals and procedures
- New “Time/Angle” time based settings (CKP/CMP timing diagnostics)
Vibration Analysis and Driveline Balance
- Similar functionality to the MTS 4000/4100
- Improved user interface with reduced configuration and setup time
- Color display
- Record capacity
- “Strobe light Pick up loop” for improved component identification*
- Second vibration transducer
- Dual Plane driveline balance
The Digital Multi-Meter
- Monitor up to four independent readings at the same time
- Capture/Record history
- Graphing capability for up to two channels
- Voltage, Current, Resistance, Pulse Width, Duty Cycle, Frequency and Period
Signal Generator
- User configurable settings for signal waveform types: sine, square, triangle, pulse generator, DC voltage and arbitrary.
- Verify integrity of module input wiring and the module hardware
- Improved interface and greater adjustability of voltage and frequency.
Save this product for later
Ford VCMM Advanced Kit With Panasonic CF53 Laptop Ready to Go
Display prices in:USD